CDBMN - PROPRIETARY MIXTURE OF HIGH FUSING POLYMERS
- MSDS: CDBMN
- Manufacturer: AMERICAN DENTAL SUPPLY INC
- Product Name: PROPRIETARY MIXTURE OF HIGH FUSING POLYMERS
- National Stock Number: 6520-00F052379
Product Identification
Product ID:PROPRIETARY MIXTURE OF HIGH FUSING POLYMERS
MSDS Date:09/15/1995
FSC:6520
NIIN:00F052379
MSDS Number: CDBMN
Responsible Party
EASTON, PA 18042-5000
US
Emergency Phone: 215-252-1464
Info Phone: 215-252-1464
Preparer: L D HOCHHAUSER
Cage: 2W369
Contractor
Telephone: 610-252-1464
Cage: 2W369
Ingredients
NON-HAZARDOUS INGREDIENTS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: SLIGHTLY IRRITATING. MOLTEN WAX
CAN CAUSE BURNS. EYES: MAY CAUSE IRRITATION. INHALATION: MILD
IRRITATION TO RESPIRATORY TRACT IF HEATED TO DECOMPOSTION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, BURNS
First Aid
First Aid:SKIN: MOTEN WAX: RINSE IMMEDIATELY W/COOL WATER, TREAT FOR
ANY THERMAL BURNS. EYES: FLUSH W/LARGE AMOUNTS OF WATER.
INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Flash Point:400F
Extinguishing Media:DRY CHEMICAL, FOAM/CO2
Fire Fighting Procedures:AVOID SKIN CONTACT. MOLTEN WAX WILL CAUSE
THERMAL BURNS UNLESS COOLED PROMPTLY.
Unusual Fire/Explosion Hazard:WATER SPRAY MAY BE INEFFECTIVE/SPREAD
MELTED BURNING WAX. COULD GENERATE IRRITATING FUMES/SMOKE.
Accidental Release
Spill Release Procedures:CAN BE SWEPT UP & DISPOSED OF IN ANY
APPROPRIATE TRASH.
Handling
Handling and Storage Precautions:KEEP CONTAINERS WELL CLOSED. STORE IN
COOL, DRY, WELL VENTILATED AREA. FOR LABORATORY/OFFICE USE ONLY.
KEEP OUT OF REACH OF CHILDREN.
Other Precautions:AVOID HEAT/DIRECT SUNLIGHT.
Exposure Controls
Respiratory Protection:NONE NEEDED IN NORMAL USE.
Ventilation:LOCAL EXHAUST NOT NECESSARY IN NORMAL USE, UNLESS MUCH
FUMES ARE GENERATED. MECHANICAL (GENERAL): IS ACCEPTABLE.
Protective Gloves:NOT REQUIRED FOR SHORT TERM EXPOSURE.
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:EYE WASH STATION.
Work Hygienic Practices:NORMAL PRECAUTIONS OF LABORATORY GOOD
HOUSEKEEPING PRACTICES SHOULD BE FOLLOWED.
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:240F
Spec Gravity:<1
Solubility in Water:INSOLUBLE
Appearance and Odor:ORANGE-RED WAXY SOLID W/VERY SLIGHT WAXY ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXTREME HEAT, DIRECT SUNLIGHT
Hazardous Decomposition Products:BY THERMAL DECOMPOSITION: CARBON
OXIDES, FUMES
Disposal
Waste Disposal Methods:LAB QUANTITIES CAN ENTER REGULAR TRASH. DISPOSE
OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.